EV charger services

Three phase EV charger installation in Mildura

About 90% of Australian homes are single phase. If your EV's onboard charger can accept 11kW or 22kW (a lot of newer Teslas, Polestars, Audis can), three phase is the difference between a 6-hour charge and a 2-hour charge. We assess your existing supply, talk to Powercor or Essential Energy about any upgrade required, install the three phase charger, and certify the lot. Honest answer up front: if your EV only accepts 7kW onboard, three phase costs more for zero benefit. We'll tell you which you actually need.

Call 0413 635 112 Get a quote

★★★★★ Google rated • Licensed VIC & NSW • Same-day quotes

★★★★★ 5-star Google rated

Same-day quotes across Mildura

5-year warranty on workmanship

Licensed VIC & NSW REC + NECA + insurance

Sister of NextES Full electrical depth

What's included

→22kW (Type 2, three phase) charger installs
→Supply augmentation where existing supply is single phase only
→Switchboard upgrades to suit three phase
→Honest assessment — we'll tell you if you don't need it
→Network coordination (Powercor / Essential Energy) included

Who this is for

→Homeowners with EVs that accept 11kW or 22kW onboard
→Homes already on three phase that want maximum charging speed
→Properties where switchboard upgrade is needed anyway
→Homes with high household electrical load (pool, large air-con, workshop)

Our scope on every install

1 Onboard charger capacity check (make sure your EV actually benefits)

2 Site assessment of existing supply and switchboard

3 Quote for charger + any required supply/switchboard upgrade

4 Network coordination where needed

5 Three phase install, test, commission, certify

Brands and products

All major Australian EV charger brands. No vendor lock-in.

Ocular LTE Plus (three phase) Tesla Wall Connector three phase Zappi V2 22kW Fronius Wattpilot 22kW Wallbox Pulsar Plus three phase

EV brands

We install chargers for every EV and PHEV brand

Tesla, BYD, MG, Polestar, Kia, Hyundai, BMW, Mercedes-Benz, Volvo, Mitsubishi and more. Pick your brand for model-specific install guidance.

Tesla 7 models BYD 8 models MG 5 models Polestar 3 models Kia 6 models Hyundai 5 models BMW 11 models Mercedes-Benz 8 models Volvo 6 models Mitsubishi 3 models

Don't see your brand? Call us — we install for any Type 2 EV.

How it works

Get a quote

Call us or send a quick form. We'll do a phone or on-site assessment and send a fixed quote within a day.

Site visit

We check your switchboard, supply, and where you want the charger mounted. Quote is locked in.

Install

A clean install — usually 3-4 hours, longer if a switchboard upgrade is part of it. We tidy as we go.

Demo & sign-off

Walk-through of how to use it, app set-up, certificate of compliance issued.

Frequently asked questions

Do I need a single phase or three phase EV charger?+

About 90% of Australian homes are single phase, and most current EVs accept a maximum of 7-11kW onboard charging anyway, which a single phase 7kW charger handles fine. Three phase 22kW is worth it only if (a) your home is already on three phase and (b) your EV accepts 11kW or 22kW onboard. If you're not sure what your EV accepts, we'll check the spec for you before we quote — no point paying for capacity you can't use.

Will a 22kW charger actually charge my EV at 22kW?+

Only if your EV's onboard charger accepts it. Many EVs cap at 7kW or 11kW on AC charging regardless of how much the wall unit can deliver — for those, a 22kW charger gives no speed benefit. Newer Teslas, Polestar 2/3, Audi e-tron, Mercedes EQ and a handful of other EVs accept 22kW. Check your owner's manual or send us the model and we'll tell you.

Will my switchboard need upgrading for an EV charger?+

Maybe. We check this as part of the quote. Homes built after roughly 2000 usually don't need anything more than a new RCD/MCB for the EV charger circuit. Older homes — especially those with ceramic fuses or no main switch — typically need a switchboard upgrade first. We do this in-house so you get one quote, one crew, one finished job.

What if my home only has single phase but I want three phase?+

Going from single to three phase is a network-level change — we coordinate with Powercor (or Essential Energy in NSW) on your behalf. Typical cost is $3,000-$8,000 depending on distance from the supply on the street and your switchboard condition. Worth it only if you genuinely need 22kW charging.

How long does it take to install an EV charger?+

Most home EV chargers we install in Mildura take 3-4 hours on site, from arrival to walk-through. If a switchboard upgrade is needed it adds another half day. From the time you call us to the day the charger's on the wall is usually 1-2 weeks.

Get a quote — Three phase 22kW

Tell us what you need. We'll come back within one business day with a quote or a few questions.