EV charger services

Mains power upgrades for EV charging — Mildura and Sunraysia

Plenty of Mildura and Sunraysia homes can't take a fast EV charger as-is. The supply from the street is too small, or it's single phase and you need three phase, or the existing main switch can't handle the extra load. We do mains power upgrades — coordinated with Powercor (VIC) or Essential Energy (NSW) — so your supply is ready before the charger goes in. Same crew, no second contractor, packaged into the EV install quote.

Call 0413 635 112 Get a quote

★★★★★ Google rated • Licensed VIC & NSW • Same-day quotes

★★★★★ 5-star Google rated

Same-day quotes across Mildura

5-year warranty on workmanship

Licensed VIC & NSW REC + NECA + insurance

Sister of NextES Full electrical depth

What's included

→Single-to-three-phase conversions
→Supply amperage increases (60A → 80A → 100A)
→Network coordination with Powercor / Essential Energy
→Service mains replacement
→Switchboard work done in-house at the same time
→Quoted as part of the EV install — one job, one price

Who this is for

→Homes wanting a 22kW three-phase EV charger but currently on single phase
→Older homes with undersized service mains (still on 32A or 60A supply)
→Properties where the EV install requires more amperage than current supply
→Commercial sites adding multiple EV chargers needing total supply increase
→Properties on rural supply where amperage is constrained

Our scope on every install

1 Site assessment — current supply vs what's needed for your EV charger

2 Network connection paperwork (Powercor or Essential Energy)

3 Service mains and meter board work

4 Switchboard upgrade or main switch resize where needed

5 Test, certify, return paperwork to the network

6 EV charger install after the supply work is complete

Brands and products

All major Australian EV charger brands. No vendor lock-in.

Powercor and Essential Energy network connections Compatible with all EV charger brands

EV brands

We install chargers for every EV and PHEV brand

Tesla, BYD, MG, Polestar, Kia, Hyundai, BMW, Mercedes-Benz, Volvo, Mitsubishi and more. Pick your brand for model-specific install guidance.

Tesla 7 models BYD 8 models MG 5 models Polestar 3 models Kia 6 models Hyundai 5 models BMW 11 models Mercedes-Benz 8 models Volvo 6 models Mitsubishi 3 models

Don't see your brand? Call us — we install for any Type 2 EV.

How it works

Get a quote

Call us or send a quick form. We'll do a phone or on-site assessment and send a fixed quote within a day.

Site visit

We check your switchboard, supply, and where you want the charger mounted. Quote is locked in.

Install

A clean install — usually 3-4 hours, longer if a switchboard upgrade is part of it. We tidy as we go.

Demo & sign-off

Walk-through of how to use it, app set-up, certificate of compliance issued.

Frequently asked questions

What if my home only has single phase but I want three phase?+

Going from single to three phase is a network-level change — we coordinate with Powercor (or Essential Energy in NSW) on your behalf. Typical cost is $3,000-$8,000 depending on distance from the supply on the street and your switchboard condition. Worth it only if you genuinely need 22kW charging.

Do I need a single phase or three phase EV charger?+

About 90% of Australian homes are single phase, and most current EVs accept a maximum of 7-11kW onboard charging anyway, which a single phase 7kW charger handles fine. Three phase 22kW is worth it only if (a) your home is already on three phase and (b) your EV accepts 11kW or 22kW onboard. If you're not sure what your EV accepts, we'll check the spec for you before we quote — no point paying for capacity you can't use.

Will my switchboard need upgrading for an EV charger?+

Maybe. We check this as part of the quote. Homes built after roughly 2000 usually don't need anything more than a new RCD/MCB for the EV charger circuit. Older homes — especially those with ceramic fuses or no main switch — typically need a switchboard upgrade first. We do this in-house so you get one quote, one crew, one finished job.

How much does a home EV charger cost to install in Mildura?+

A standard 7kW single-phase home EV charger installed at a typical Mildura home runs from around $1,500 to $2,500 all-in (charger + install + certification), depending on the brand of charger you choose and the length of the cable run from your switchboard to the install point. Three-phase 22kW installs and jobs that need a switchboard upgrade cost more. We give you a fixed quote after a site visit so there are no surprises.

How long does it take to install an EV charger?+

Most home EV chargers we install in Mildura take 3-4 hours on site, from arrival to walk-through. If a switchboard upgrade is needed it adds another half day. From the time you call us to the day the charger's on the wall is usually 1-2 weeks.

Get a quote — Mains power upgrades

Tell us what you need. We'll come back within one business day with a quote or a few questions.