Mitsubishi EV & PHEV

Mitsubishi Outlander PHEV charger installation in Mildura

Mitsubishi Outlander PHEV has been Australia's bestselling plug-in hybrid for years. The current third-generation is the most common across Mildura. The Eclipse Cross PHEV is the smaller alternative. Both accept 3.7kW or 7kW onboard — a standard single-phase 7kW wall charger is the right choice.

Call 0413 635 112 Get a quote

★★★★★ Google rated • Licensed VIC & NSW • Same-day quotes

★★★★★ 5-star Google rated

Same-day quotes across Mildura

5-year warranty on workmanship

Licensed VIC & NSW REC + NECA + insurance

Sister of NextES Full electrical depth

Mitsubishi models we install chargers for

Mitsubishi onboard AC charging:

Model	Type	Onboard AC	Recommended charger
Mitsubishi Outlander PHEV (current Gen 4)	PHEV	7.2kW single phase	Ocular LTE 7kW (our pick) — or Zappi V2 / Wallbox Pulsar Plus
Mitsubishi Outlander PHEV (Gen 3, 2017-2022)	PHEV	3.6kW single phase	Ocular LTE 7kW (our pick) — will draw 3.6kW
Mitsubishi Eclipse Cross PHEV	PHEV	3.7kW single phase	Ocular LTE 7kW (our pick) — standard single phase wall charger

Install notes for Mitsubishi owners

→Current Outlander PHEV (Gen 4) charges at 7.2kW — full charge from empty in about 90 minutes on a 7kW wall unit.
→Earlier Gen 3 Outlanders cap at 3.6kW — a 7kW wall unit still works fine but won't draw beyond 3.6kW.
→No three phase benefit on any Mitsubishi PHEV — single phase 7kW is the right call.
→Mitsubishi Motors app handles vehicle, charger app handles charger.

Chargers we recommend for Mitsubishi

Ocular LTE / Eco (our pick — solar-aware option available)Zappi V2 (solar-aware alternative)Wallbox Pulsar PlusTesla Wall Connector Gen 3

How it works

Get a quote

Call us or send a quick form. We'll do a phone or on-site assessment and send a fixed quote within a day.

Site visit

We check your switchboard, supply, and where you want the charger mounted. Quote is locked in.

Install

A clean install — usually 3-4 hours, longer if a switchboard upgrade is part of it. We tidy as we go.

Demo & sign-off

Walk-through of how to use it, app set-up, certificate of compliance issued.

Frequently asked questions

How much does a home EV charger cost to install in Mildura?+

A standard 7kW single-phase home EV charger installed at a typical Mildura home runs from around $1,500 to $2,500 all-in (charger + install + certification), depending on the brand of charger you choose and the length of the cable run from your switchboard to the install point. Three-phase 22kW installs and jobs that need a switchboard upgrade cost more. We give you a fixed quote after a site visit so there are no surprises.

Do I need a single phase or three phase EV charger?+

About 90% of Australian homes are single phase, and most current EVs accept a maximum of 7-11kW onboard charging anyway, which a single phase 7kW charger handles fine. Three phase 22kW is worth it only if (a) your home is already on three phase and (b) your EV accepts 11kW or 22kW onboard. If you're not sure what your EV accepts, we'll check the spec for you before we quote — no point paying for capacity you can't use.

How long does it take to install an EV charger?+

Most home EV chargers we install in Mildura take 3-4 hours on site, from arrival to walk-through. If a switchboard upgrade is needed it adds another half day. From the time you call us to the day the charger's on the wall is usually 1-2 weeks.

Can I charge my EV from my solar panels?+

Yes — with a solar-aware EV charger like Zappi, Fronius Wattpilot or myenergi, the charger reads your solar export in real time and adjusts its draw to match. End result: most of your EV's charge can come from sun rather than grid. We install all the major solar-aware brands across the Sunraysia.

Get a quote — Mitsubishi

Tell us what you need. We'll come back within one business day with a quote or a few questions.